• Automatic quantitative pre-XL-PSD1600 machine
  • Automatic quantitative pre-XL-PSD1600 machine
Automatic quantitative pre-XL-PSD1600 machine
Automatic quantitative pre-XL-PSD1600 machine
+

Share

Automatic quantitative pre-XL-PSD1600 machine

XL-PSD full-automatic intermittent pressurized quantitative pre-development machine is developed, designed and manufactured by our company according to the new situation in China. It consists of a quantitative pressurized pre-development machine, a vulcanization, drying, screening, crushing, and conveying device, etc. Full-automatic circulating foaming system. It is suitable for pre-foaming of expandable polystyrene (EPS) foam products, and is a necessary machine for foam products factories.

Need to find the right solution, please contact our technicians, Contact us!

Classification

Label

  • Product Description
  • Product composition system description

    XL-PSD full-automatic intermittent pressurized quantitative pre-development machine is developed, designed and manufactured by our company according to the new situation in China. It consists of a quantitative pressurized pre-development machine, a vulcanization, drying, screening, crushing, and conveying device, etc. Full-automatic circulating foaming system. It is suitable for pre-foaming of expandable polystyrene (EPS) foam products, and is a necessary machine for foam products factories.

    Performance characteristics

    1. The automatic quantitative pre-release machine produced by our company can perform both a foaming and a secondary foaming. It is a multifunctional pre-release machine.
    2. The electronic control system of the whole machine adopts the PLC programmable controller produced by Omron Company of Japan and the touch screen produced by Taiwan. The electrical spare parts are made of famous brands at home and abroad, with reliable action, low failure rate and convenient operation of on-site modification and recording data.
    3. Solenoid valve, butterfly valve, angle seat valve using domestic and foreign well-known enterprise products. The material is all stainless steel, flexible action, long life, ensure and improve the operation reliability of the machine.

    Main technical parameters of products

    Project Unit PSD1800
    Foaming barrel body mm 1800*2240
    effective volume m3 4.5
    Steam pipe inlet mm DN50
    Steam pressure MPa 0.4~0.5
    Steam consumption Kg/cycle 15~18
    Compressed air inlet Inches 2
    Compressed air pressure MPa 0.6~0.8
    Compressed air consumption m3/cycle 0.6~0.8
    Blowdown Exhaust mm DN150
    Drain mm DN80
    Motor
    Power
     
    Spindle reducer KW 15
    auger motor KW 5.5
    discharge fan KW 5.5
    Total installed power KW 26
    Electricity consumption kg/h 17~20
    foaming density Once kg/h 10~30
    production capacity 12g/l once kg/h 2400
    15g/l at a time kg/h 3000
    20g/l once kg/h 4000
    30g/l at a time kg/h 5000
    Exterior dimensions L×W×H mm 2100 × 2100 × 5500
    Foaming cycle S 80~140
    Machine weight t 5.5

    Main product configuration

    Serial Number Name Brand
    1 PLC Omron
    2 Digital output module Omron
    3 Touch screen complicated and easy
    4 IoT Plug-in complicated and easy
    5 Contactor Delixi
    7 Thermal overload relay Delixi
    9 Intermediate relay Omron
    10 switching power supply Omron
    11 Solenoid valve group Yadke
    12 Pressure transmitter Fizeau
    13 Butterfly valve Good workers in Hangzhou
    14 angle seat valve Shanghai Hongpeng
    15 Proportional valve Hebei Xibo
    16 Pressure reducing valve Yoshida Kai
    17 Cylinder Yadke
    18 Reducer Zhejiang Constant Tooth

    Product Attached Drawing

Automatic quantitative pre-XL-PSD1600 machine

XL-PSD full-automatic intermittent pressurized quantitative pre-development machine is developed, designed and manufactured by our company according to the new situation in China. It consists of a quantitative pressurized pre-development machine, a vulcanization, drying, screening, crushing, and conveying device, etc. Full-automatic circulating foaming system. It is suitable for pre-foaming of expandable polystyrene (EPS) foam products, and is a necessary machine for foam products factories.

Need to find the right solution, please contact our technicians, Contact us!

Classification

Label

Product inquiry

Note: Please leave your mobile phone and E-mail, and our professionals will contact you as soon as possible!