Products
andorra Automatic quantitative pre-XL-PSD1400 machine
Category:
andorraEPS production line
Product Description
Product composition system description
XL-PSD full-automatic intermittent pressurized quantitative pre-development machine is developed, designed and manufactured by our company according to the new situation in China. It consists of a quantitative pressurized pre-development machine, a vulcanization, drying, screening, crushing, and conveying device, etc. Full-automatic circulating foaming system. It is suitable for pre-foaming of expandable polystyrene (EPS) foam products, and is a necessary machine for foam products factories.
Performance characteristics
1. The automatic quantitative pre-release machine produced by our company can perform both a foaming and a secondary foaming. It is a multifunctional pre-release machine.
2. The electronic control system of the whole machine adopts the PLC programmable controller produced by Omron Company of Japan and the touch screen produced by Taiwan. The electrical spare parts are made of famous brands at home and abroad, with reliable action, low failure rate and convenient operation of on-site modification and recording data.
3. Solenoid valve, butterfly valve, angle seat valve using domestic and foreign well-known enterprise products. The material is all stainless steel, flexible action, long life, ensure and improve the operation reliability of the machine.
Main technical parameters of products
| Project | Unit | PSD1400A | |
| Foaming barrel body | mm | 1400*2250 | |
| effective volume | m3 | 2.5 | |
| Steam pipe inlet | mm | DN50 | |
| Steam pressure | MPa | 0.4～0.5 | |
| Steam consumption | Kg/cycle | 13～15 | |
| Compressed air inlet | Inches | 1 | |
| Compressed air pressure | MPa | 0.6～0.8 | |
| Compressed air consumption | m3/cycle | 0.4～0.6 | |
| Blowdown | Exhaust | mm | DN150 |
| Drain | mm | DN80 | |
| Motor Power |
Spindle reducer | KW | 7.5 |
| auger motor | KW | 3.0 | |
| discharge fan | KW | 2.2 | |
| Total installed power | KW | 12.7 | |
| Electricity consumption | kg/h | 8 to 10 | |
| foaming density | Once | kg/h | 10～30 |
| production capacity | 12g/l once | kg/h | 530 |
| 15g/l at a time | kg/h | 670 | |
| 20g/l once | kg/h | 1200 | |
| 30g/l at a time | kg/h | 1400 | |
| Exterior dimensions L×W×H | mm | 2800 × 2500 × 4900 | |
| Foaming cycle | S | 90～140 | |
| Machine weight | t | 2.6 | |
Main product configuration
| Serial Number | Name | Brand |
| 1 | PLC | Omron |
| 2 | Digital output module | Omron |
| 3 | Touch screen | complicated and easy |
| 4 | IoT Plug-in | complicated and easy |
| 5 | Contactor | Delixi |
| 7 | Thermal overload relay | Delixi |
| 9 | Intermediate relay | Omron |
| 10 | switching power supply | Omron |
| 11 | Solenoid valve group | Yadke |
| 12 | Pressure transmitter | Fizeau |
| 13 | Butterfly valve | Good workers in Hangzhou |
| 14 | angle seat valve | Shanghai Hongpeng |
| 15 | Proportional valve | Hebei Xibo |
| 16 | Pressure reducing valve | Yoshida Kai |
| 17 | Cylinder | Yadke |
| 18 | Reducer | Zhejiang Constant Tooth |
Product Attached Drawing
Follow Us
Contact Us
Address: Tianzhuang Development Zone, xinji city, Shijiazhuang, Hebei Province (48.7km from Hengjing Line)
Tel: +86-15803118880
WeChat: +86-18633881383
E-mail: xuelongqiye@163.com